Updated diffuser and belly pan

The new floor is 3 inches lower than before so I had to lower the diffuser and the belly pan 3 inches as well. The belly pan fills the gap between the floor and the diffuser at the back and it goes beneath the differential.

On the old belly pan, I had to cut a hole in it for the differential to poke through but now I can use just a single piece of 20 gauge aluminum to do the job.

All that material above the yard stick has to be cut off the diffuser

The diffuser attaches to the belly pan then rises up towards the back.

The diffuser is held on at the back by adjustable struts. In this picture the diffuser is set at it's highest position