Building a 1967 MGB-GT for autocross competition in SCCA's EMod class
Monday, April 4, 2011
Bodywork and paint-part 4
This is what writing with a Sharpie looks like even after several coats of primer
See? Marks that weren't even readily visible suddenly jump out when the primer hits them. And several different kinds of thinner were used in an attempt to remove the Sharpie ink. I finally had to wire brush them off.
The Interior is primed and it wasn't easy. All those holes are little dust traps and the roll cage is very hard to get around.
No comments:
Post a Comment